首页> 美国卫生研究院文献>Journal of Food Science and Technology >Impact of instantaneous controlled pressure drop on microstructural modification of green tea and its infusion quality
【2h】

Impact of instantaneous controlled pressure drop on microstructural modification of green tea and its infusion quality

机译:瞬时控制压降对绿茶微结构改性及其浸入质量的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Instantaneous controlled pressure drop (DIC) was applied to obtain a suitable cell disruption extent as a technology in green tea processing. Microstructural observations showed that DIC increased cell disruption in an even manner as reflected from loosened palisade, distorted cells, widened space between cells, disrupted and rearranged cellular membrane in tea leaves. Color difference determination supported that DIC could facilitate the release and transport of cell contents. DIC sample showed a rise in redness, over 2.5 times greater than the control after spreading naturally for 24 h. Chemical determination revealed a better infusion behavior of tea polyphenols and amino acids in green tea manufactured by DIC method both at high and low temperature. The increase in tea polyphenols content in liquor for the first brew from twisted and needle tea was about 35% and that from flat tea was about 15% in DIC method over the traditional processing. These results suggest that DIC process can be applied in green tea processing for both a traditional product and a new kind of tea capable of making with cold water.
机译:作为绿茶加工中的技术,应用瞬时控制压降(DIC)获得合适的细胞破坏程度。微观结构观察表明,DIC以均匀的方式增加了细胞破坏,这反映在栅栏松动,细胞扭曲,细胞之间的空间变宽,茶叶的细胞膜破裂和重新排列。色差确定支持DIC可以促进细胞内容物的释放和运输。 DIC样品自然铺展24小时后,发红度增加,是对照的2.5倍以上。化学测定表明,在高温和低温下,用DIC法制得的绿茶中茶多酚和氨基酸的浸入性能都更好。与传统工艺相比,用DIC方法进行的第一轮冲泡和针茶中白酒中茶多酚含量的增加约为35%,而扁平茶中白茶中茶多酚含量的增加约为15%。这些结果表明,DIC工艺可以用于绿茶加工中的传统产品和能够用冷水制备的新型茶中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号