首页> 美国卫生研究院文献>Sensors (Basel Switzerland) >Multi-Objective Sliding Mode Control on Vehicle Cornering Stability with Variable Gear Ratio Actuator-Based Active Front Steering Systems
【2h】

Multi-Objective Sliding Mode Control on Vehicle Cornering Stability with Variable Gear Ratio Actuator-Based Active Front Steering Systems

机译:基于可变传动比执行器的主动前转向系统对车辆转弯稳定性的多目标滑模控制

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Active front steering (AFS) is an emerging technology to improve the vehicle cornering stability by introducing an additional small steering angle to the driver’s input. This paper proposes an AFS system with a variable gear ratio steering (VGRS) actuator which is controlled by using the sliding mode control (SMC) strategy to improve the cornering stability of vehicles. In the design of an AFS system, different sensors are considered to measure the vehicle state, and the mechanism of the AFS system is also modelled in detail. Moreover, in order to improve the cornering stability of vehicles, two dependent objectives, namely sideslip angle and yaw rate, are considered together in the design of SMC strategy. By evaluating the cornering performance, Sine with Dwell and accident avoidance tests are conducted, and the simulation results indicate that the proposed SMC strategy is capable of improving the cornering stability of vehicles in practice.
机译:主动式前转向(AFS)是一种新兴技术,可通过在驾驶员的输入端引入一个较小的转向角来提高车辆的转弯稳定性。本文提出了一种具有可变齿轮比转向(VGRS)执行器的AFS系统,该系统通过使用滑模控制(SMC)策略进行控制,以提高车辆的转弯稳定性。在AFS系统的设计中,考虑使用不同的传感器来测量车辆状态,并且还对AFS系统的机制进行了详细建模。此外,为了提高车辆的转弯稳定性,在SMC策略的设计中同时考虑了两个相关的目标,即侧滑角和横摆率。通过评估转弯性能,进行了Sine with Dwell和事故回避测试,仿真结果表明,所提出的SMC策略能够在实践中提高车辆的转弯稳定性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号