The injury of gunners caused by muzzle shock-wave has always been a great problem when firing inside the protective cover. The distribution regularity and personnel injury from the muzzle blast-wave were investigated by both test and numerical simulation. Through the inside firing test, the changes of overpressure and noise have been measured at different measuring points in the thin-wall cover structure with different open widths and shallow covering thickness. The distribution regularity of muzzle shock-wave with different firing port widths is calculated by ANSYS/LSDYNA software. The overpressure distribution curves of muzzle shock-wave inside the structure can be obtained by comparing the test results with the numerical results. Then, the influence of open width and shallow covering thickness is proposed to give a reference to the protective design under the condition of the inside firing with the same cannon caliber.
展开▼
