首页> 中文期刊> 《天津大学学报:英文版》 >Hydrodynamics of Continuous Spiral Dryer with Rotatory Conical Sleeves: Experiments versus CFD Simulations

Hydrodynamics of Continuous Spiral Dryer with Rotatory Conical Sleeves: Experiments versus CFD Simulations

     

摘要

In this study, a continuous and airtight twinspiral dryer was developed in accordance with the characteristics and challenges in the process of disposing polysilicon slurry. Computational fluid dynamics(CFD)simulations were used to investigate the flow field in the rotating twin-spiral continuous dryer and an original discrete phase model was also elaborated to compare with the cold-modeling experimental results. The corresponding flow field was obtained using the available inlet velocity of 0.05-0.3 m/s and the rotational speed of the inner cone of 12-44 r/min, the residence time distribution, and tracked particles trajectory. Results showed that the residence time of the tracer particles in the cone cylinder was about 15.8-25.4% of the time spent out of it, and the particle's residence time was much shorter in contrast to the rotational speed and inlet velocity. The external ribbon had a larger influence on the fluid, thereby leading to a larger velocity in the region outside the cone compared to that in the region inside the cone. In addition, the appearance of the vortex and boundary layer separation at the back of the ribbon and the spoke bar had secondary diversion effects on the fluid. Furthermore, the inlet velocity had little influence on the flow field while the rotational speed of the cone greatly affected the flow field. Hence, the CFD simulations showed good agreement with the experimental results.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号