At present,associated flow rule of traditional plastic theory is adopted in the slip line field theory and upper bound method of geotechnical materials. So the stress characteristic line conforms to the velocity line. It is proved that geotechnical materials do not abide by the associated flow rule. It is impossible for the stress characteristic line to conform to the velocity line. Generalized plastic mechanics theoretically proved that plastic potential surface intersects the Mohr-Coulomb yield surface with an angle,so that the velocity line must be studied by non-associated flow rule. According to limit analysis theory,the theory of slip line field is put forward in this paper,and then the ultimate bearing capacity of strip footing is obtained based on the associated flow rule and the non-associated flow rule individually. These two results are identical since the ultimate bearing capacity is independent of flow rule. On the contrary,the velocity fields of associated and non-associated flow rules are different which shows the velocity field based on the associated flow rule is incorrect.
展开▼