首页> 中文期刊> 《化工科技》 >柱撑粘土在加氢脱硫中的应用研究

柱撑粘土在加氢脱硫中的应用研究

         

摘要

以柱撑粘土为载体,制备了Mo-Ni/Al-Fe-PILC和Mo-Ni/Al-PILC加氢脱硫催化剂,在50 mL微型固定床反应评价装置中对FCC汽油进行加氢脱硫研究.结果表明:Mo-Ni/Al-Fe-PILC和Mo-Ni/Al-PILC 2种催化剂具有较好的加氢脱硫效果,脱硫率达到75%以上,最佳的工艺条件为反应温度340℃,反应压力6.0 MPa,空速为4.0h-1.%Mo-Ni/Al-Fe-PILC and Mo-Ni/Al-PILC hydrodesulfurization catalysts were prepared by PILC used as the carrier and the catalyst effect was evaluated in 50 mL fixed-bed reactor, for the FCC gasoline hydrodesulfurization.The results showed that Mo-Ni/Al-Fe-PILC and Mo-Ni/Al-PILC had good hydrodesulfurization effect,the desulphurization rate reached more than 75%,the optimum technological conditions for the reaction were as follows: temperature 340 ℃ , reaction pressure 6.0 Mpa, airspeed 4.0 h-1.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号