Moldflow软件对轿车水箱盖注射成型模具温度的优化

摘要

In this study, the injection molding temperature of water tank cover for passenger car was optimized using Moldlfow. The results showed that, when the mold temperature was set at 175℃, the injection time was short, the volume curing rate at the end of injection was low, and the volume curing rate after 35 s was high. Moldlfow was effective software to optimize rubber injection molding process, shorten the process and mold design cycle, and improve production efifciency and product quality.%用Moldflow软件优化轿车水箱盖注射成型的模具温度。结果表明：模具温度在175℃时，胶料充模时间短，充模结束时的体积固化率小，充模后35 s时的体积固化率大。Moldflow软件可以优化橡胶制品的注射成型工艺，缩短工艺和模具设计周期，提高生产效率和产品质量。