基于ANSYS的冷却运输机输送链接触有限元分析

摘要

利用Pro/Engineer软件建立了冷却运输机输送链的三维实体模型,然后导入到ANSYS软件中.基于ANSYS软件,采用有限元接触分析方法对冷却运输机滚子输送链进行有限元接触分析,找出了输送链的危险区域和薄弱环节,其结果对冷却运输机输送链的优化设计具有一定的指导意义.%the three-dimensional solid model of the cooling transporter conveyor chain by means of the Pro/Engineer software was built. Then the model af the cooling transporter conveyor chain in Pro/Engineer is changed as finite element model in ANSYS software through the software interface between Pro/ Engineer and ANSYS. Based on the ANSYS software, we used the method of the finite element analysis to analyze the contacts finite element of the cooling transporter conveyor chain, found out the danger section and weaknesses. The results can instruct the optimization design of the cooling transporter conveyor chain.