以"神马"和"出水芙蓉"2个切花菊品种的叶片为外植体,来建立不定芽再生体系.结果表明:基因型和植物生长调节剂是影响叶片不定芽再生的重要因素,并且较高浓度生长调节剂会导致不定芽和再生小苗玻璃化,不利于植株再生."神马"的最适直接诱导不定芽再生培养基为MS+NAA 1 mg/L+6-BA 1 mg/L,再生率高达955%;"出水芙蓉"的最适直接诱导不定芽再生培养基为MS+NAA 01 mg/L+6-BA 1 mg/L,但再生率仅为463%.植物生长调节剂影响再生植株生根数,适宜的生根培养基为1/2 MS+07 mg/L NAA.%Using leaf disks of cutting chrysanthemum ( “Jinba” and “Chushui Furong”) as explants, an efficient regeneration system from the adventitious buds was established. The resuits indicated that the genotypes and plant growth regulators greatly affected shoot regeneration from adventitious buds. High concentrations of the plant growth regulators increased the vitrification of adventitious buds and shoots from leaves, and then, decreased the shoot regeneration. The optimum medium which could directly induce shoot regeneration of “Jinba” was MS medium supplemented with 1.0 mg/L naphthalene-acetic acid (NAA) and 1.0 mg/L 6benzylamino purine (6-BA), on which the regeneration rate was 95.5%. In “Chushui Furong”, that was MS medium with 0. 1 mg/L NAA and 1.0 mg/L 6-BA, and the regeneration rate was 46.3%. The plant growth regulators affected the No. of roots induction from shoots obviously, and the optimum rooting medium was 1/2 MS medium with 0.7 mg/L NAA.
展开▼