Modification of the Micro Arc-oxidized Ti Surface for Implant Applications

摘要

Surface treatments applied to titanium and its alloys for implant applications are important for the development of bio properties.In this study,first an oxide layer was formed on the surface of the titanium plate by micro arc oxidation,and then both calcium phosphate and calcium phosphate/chitosan accumulation were performed for different samples by the sol-gel method.FE-SEM/EDS examinations,XRD,FTIR and thermal analysis were performed for these micro arc-oxidized,calcium phosphate-coated and calcium phosphate/chitosan-coated surfaces.The surface roughnesses for these surfaces were measured between 10μm and 100μm,suitable for bone development on the surface.The effect of chitosan addition on the calcium phosphate-coated surface on apatite formation ability and antibacterial properties was investigated.Although the addition of chitosan slows down the formation of apatite,it ensured that the coating had antibacterial properties.The calcium phosphate/chitosan biocomposite obtained can be recommended for dental and orthopedic implants.