首页> 中文期刊>工业水处理 >循环水中304不锈钢发生点蚀的Cl-浓度阈值研究

循环水中304不锈钢发生点蚀的Cl-浓度阈值研究

     

摘要

The relationship between pitting corrosion potential (Eb) of 304 stainless steel in circulating cooling water and the pit depth and pit number with chloride ion concentration has been studied by electrochemistry. The results show that the Eb always reduces with the increase of chloride ions concentration at room temperature. The tendency of pitting corrosion increases when the chloride ion mass concentration is less than 800 mg/L. And, the pitting corrosion does not have obvious increase,when the chloride ion mass concentration is higher than 800 mg/L. The threshold value of chloride ion mass concentration of the pitting corrosion tendency of 304 stainless steel obtained by the depth and number of surface pits is 770 mg/L.%采用电化学法研究了循环水中304不锈钢点蚀电位(Eb)、蚀孔深度、蚀孔数量与氯离子浓度的关系.结果表明,常温下304不锈钢的Eb总是随着氯离子浓度的增大而减小,当氯离子质量浓度小于800 mg/L时,增大氯离子浓度易导致点蚀敏感,而大于该值时增大氯离子浓度不会明显增大点蚀倾向;从蚀孔深度和表面蚀孔数量得出的304不锈钢点蚀倾向由大变小的氯离子质量浓度阈值为770 mg/L.

著录项

  • 来源
    《工业水处理》|2012年第8期|75-78|共4页
  • 作者单位

    中海油天津化工研究设计院,天津300131;

    中国石化北京北化院燕山分院,北京102500;

    中国石化北京北化院燕山分院,北京102500;

    中国石化北京北化院燕山分院,北京102500;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 TQ085+.412;
  • 关键词

    循环水; 304不锈钢; 点蚀; 阈值;

  • 入库时间 2022-08-17 17:51:55

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号