关于MEMS结构疲劳特性的研究报道中,典型的研究疲劳的方法是基于观测裂纹的产生和扩展的,如一种扇型梳壮驱动器用来产生循环的拉压作用,以此可以观察Si梁结构的裂纹的扩展情况.该方法采用渐变参量的方法来描述疲劳现象,如参量平均杨氏模量E,而且提出了一种利用检测电容来达到疲劳特性描述的测试结构.该电容和由于作用力让梁产生的位移之间有关.通过检测到的电容值,计算平均杨氏模量E以此来反映这种简单的MEMS结构的疲劳特性,最后,这种方法通过ANSYS进行验证.%Many results on the fatigue properties of a MEMS structure have been reported, among which the typical approaches were based on and developed from the principles of detecting the flaws and their propagations, such as using a fan shape comb-drivers to yield cyclic compression and tension, and then, to observe the flaw propagation in a Si beam structure. This paper aims at describing the fatigue phenomenon by using the gradually variable parameters i.e., mean E method, and then, proposing a test structure, through measuring capacitance to describe the fatigue property. This capacitance has a close relation to the displacement induced by the force applied on. The mean Young's modulus E is calculated according to the measured capacitance to reflect the fatigue property of the simple MEMS structure. At the end of this article, this method is verified by ANSYS.
展开▼
