Common compliant joints generally have limited range of motion,reduced fatigue life and high stress concentration.To overcome these shortcomings,periodically corrugated cantilever beam is applied to design compliant joints.Basic corrugated beam unit is modeled by using pseudo-rigid-body method.The trajectory and deformation behavior of periodically corrugated cantilever beam are estimated by the transformation of coordinate and superposition of the deformation of corrugated beam units.Finite element analysis(FEA)is carried out on corrugated cantilever beam to estimate the accuracy of the pseudo-rigid-body model.Results show that the kinetostatic behaviors obtained by this method,which has a relative error less than 6%,has good applicability and corrugated cantilever beam has the characteristics of a large range of motion and high mechanical strength.The corrugated cantilever beam is then applied to design a flexible rotational joint to obtain a larger angle output.The paper proposes a pseudo-rigid-body model for corrugated cantilever beam and designed a flexible rotational joint with large angle output.
展开▼
