The formed characteristics of thin-wall part is studied when it is in the process of MPAW. Finite element method is used to simulate the temperature field coupling flow field in the welding of thin-wall part. It is found that because of the obvious effect of heat accumulation in cross-section,where the distribution of temperature field area presents trapezoidal inverted approximately in the molten pool and the non-molten pool area presents level. The surface tension,the electromagnetic force and buoyancy are considered for analyzing the effects on the fluid flow of welding-pool. It can be obtained that the surface tension is the main driving force in the welding pool,which is far greater than electromagnetic force and buoyancy.
展开▼