首页> 中文期刊> 《中国粉体技术 》 >Ni-Pd纳米涂层整体式催化剂加氢性能研究

Ni-Pd纳米涂层整体式催化剂加氢性能研究

             

摘要

A novel cordierite monolithic catalyst with porous hollow silica nano-particles as washcoat was prepared by a dip-coating method and the Pd active component and Ni promoter were loaded by a microwave method. The performance of the prepared catalysts for selective hydrogenation of acetylene was investigated at varying space velocity, the porous hollow silica nano-particles coating amount and Ni loading amount It was found that the coating of porous hollow silica nano-particles on the cordierite substrate could significantly promote the catalytic performance. When the space velocity was 3 800 h1, the mass fraction of coating on porous hollow silica nano-particles was 6%, the molar ratio of Ni and Pd was 4 I 1, the reaction pressure was 0.1 Mpa and reaction temperature was 54 t, theethylene selectivity of the novel catalyst still remained 40.9% when theacetylene was nearly completely converted.%采用浸涂法将自制的介孔空心Si02纳米粉体涂覆到堇青石基体上,然后采用微波法负载活性组分Pd和助剂 Ni制备了纳米涂层整体式加氢催化剂,并考察空速、涂层增重、Ni助剂添加量等因素对其乙炔选择性加氢催化性能的影响.结果表明:经过涂覆后的堇青石整体式催化剂加氢性能与未涂覆时相比有了显著提高,且添加适量的助剂Ni有助于催化性能的进一步改进.在反应温度为54℃、压力为0.1 MPa、空速为3 800h-1的条件下,使用涂层增量质量分数为6%、Ni与Pd物质的量比为4:1的催化剂,当乙炔接近完全转化时,乙烯选择性能够到达40.9%.

著录项

  • 来源
    《中国粉体技术 》 |2011年第4期|20-2440|共6页
  • 作者单位

    北京化工大学 纳米材料先进制备技术与应用科学教育部重点实验室,北京 100029;

    北京化工大学 纳米材料先进制备技术与应用科学教育部重点实验室,北京 100029;

    北京化工大学 纳米材料先进制备技术与应用科学教育部重点实验室,北京 100029;

    北京化工大学 纳米材料先进制备技术与应用科学教育部重点实验室,北京 100029;

    北京化工大学 纳米材料先进制备技术与应用科学教育部重点实验室, 教育部超重力工程研究中心,北京 100029;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 TQ032.41;
  • 关键词

    整体式催化剂 ; 纳米材料 ; 涂覆 ; 选择性加氢 ;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号