为探索加热丝材质和雾化温度对电子烟气溶胶主要成分释放量的影响.利用电子烟综合测试平台,以组装了静态初始阻值相同的Ti、Ni200和SS316加热丝电子烟为研究对象,考察在180℃-300℃雾化温度范围内电子烟气溶胶中烟碱、丙二醇、丙三醇的释放量变化.结果表明:1)三种加热丝动态实时阻值与工作温度呈现较强的正相关;2)同一雾化温度下,静态初始阻值相同的Ti、Ni200和SS316加热丝雾化烟碱、丙二醇和丙三醇的效率,Ni200最大,Ti次之,SS316最小;3)电子烟气溶胶中烟碱、丙二醇和丙三醇释放量均随三种加热丝雾化温度的上升呈现增加趋势,烟碱释放量在220-240 ℃之间快速增加,之后增幅不大;4)随着雾化温度升高到260 ℃,丙二醇和丙三醇的相对释放量发生了十分明显的变化,丙三醇的释放量高于丙二醇释放量.%An electronic cigarette comprehensive test platform was used to study effects of heating wire made with different materials,i.e.Ti,Ni200 and SS316L,and vaporization temperatures,ranging from 180℃ to 300℃,on release of nicotine,propylene glycol and glycerin in e-cigarette.Results showed that: 1)The dynamic real-time resistance of these three heating wire materials was positively correlated with vaporization temperature.2)Under same temperature condition and static initial resistance,e-cigarette with Ni200 heating wire delivered maximum nicotine,propylene glycol and propylene glycol,followed by e-cigarette with Ti heating coil and SS316 heating coil.3)Yields of nicotine,propylene glycol,glycerin were positively proportional to temperature.Yield of nicotine increased rapidly at 220-240 ℃,and then slowed down with further increase of temperature.4)As temperature increased to 260℃,yields of propylene glycol and glycerin were significantly changed,while yield of glycerin was higher than propylene glycol.
展开▼
