首页> 外文学位 >A multidimensional approach to test item selection in a practical color vision test.
【24h】

A multidimensional approach to test item selection in a practical color vision test.

机译:在实际的色觉测试中,用于测试项目选择的多维方法。

获取原文
获取原文并翻译 | 示例

摘要

Previous research evaluated the color vision requirements and perceptual factors related to interpretation of color-coded weather radar information and resulted in an 80-item developmental test. The objective was to use Item Response Theory (IRT) methods to select the most efficient set of those items without adversely affecting the reliability or item domain of the test. The resulting test was used to examine the effectiveness of using Located Latent Class Analysis (LLCA) to distinguish between individuals based on their capability of identifying colors on a CRT. The participants were 335 individuals with normal color vision and 200 with varying degrees of red-green types of color vision deficiency. BILOG-3 (with a 3-parameter IRT model specified) provided indices for discrimination, item difficulty, and guessing. The greater the discrimination value, the better the item discriminates high performers from low performers. Likewise, large difficulty values (in the positive direction) indicate more difficult items. Higher guessing values indicate a greater probability of guessing the correct choice. BILOG-3 also calculates an estimate of each individual's ability using the same scale as the item difficulty index. Using these indices, a composite scatterplot was constructed. With the item discrimination plotted on the Y-axis, and the item difficulty/ability estimate on the X-axis, boundary lines were drawn for the guessing parameter in addition to the minimum and maximum ability estimates for each anomaloscope diagnosis. Once the item's content was coded onto the scatterplot, items were evaluated on several dimensions to select the most efficient items. Maintaining the original pass/fail criterion, high consistency was found between the original 80 items and the 50-item test (K(172) = .95) as was the correlation between percent correct scores (r(172) = .99). The original inter-item reliability (α = .96) and item content were unaltered by shortening the test. LLCA latent trait scores, CTT percent correct scores, and IRT ability estimates were highly correlated; however, agreement between LLCA latent trait class assignments and pass/fail on the CWRT was moderate, K(172) = .62. The unique, multidimensional approach to item selection using the IRT 3-parameter estimates while taking item content and ability range information into consideration yielded 50 highly reliable items.
机译:先前的研究评估了与色码天气雷达信息解释相关的色觉要求和感知因素,并进行了80个项目的开发测试。目的是使用项目响应理论(IRT)方法选择最有效的一组项目,而不会对测试的可靠性或项目领域产生不利影响。所得测试用于检查使用“潜在潜在类别分析”(LLCA)来基于个人识别CRT颜色的能力来区分个人的有效性。参与者为335名正常的色觉患者和200名不同程度的红绿色类型的色觉不足者。 BILOG-3(指定了3参数IRT模型)提供了区分,项目难度和猜测的索引。判别值越大,则该项目将高绩效者与低绩效者区别开的越好。同样,较大的难度值(正方向)表示难度更大的项目。较高的猜测值表示猜测正确选择的可能性较高。 BILOG-3还使用与项目难度指数相同的标度来计算每个人的能力估计。使用这些指标,构建了一个复合散点图。在Y轴上绘制物品区分度,在X轴上绘制物品难度/能力估计值的基础上,除了为每个肛门镜诊断的最小和最大能力估计值之外,还为猜测参数绘制了边界线。将项目的内容编码到散点图后,便会在多个维度上对项目进行评估,以选择最有效的项目。维持原始的通过/失败标准,原始的80个项目和50个项目的测试之间的一致性很高(K (172) = .95),正确分数百分比之间的相关性(r < sub>(172) = .99)。通过缩短测试,原来的项目间可靠性(α= 0.96)和项目内容没有改变。 LLCA潜在性状评分,CTT正确率百分比和IRT能力评估高度相关;但是,LLCAA潜在性状类别分配与CWRT上的通过/失败之间的协议是中等的,K (172) = 0.62。使用IRT 3参数估计值进行项目选择的独特多维方法,同时考虑到项目内容和能力范围信息,得出了50个高度可靠的项目。

著录项

  • 作者

    Milburn, Nelda Jean.;

  • 作者单位

    The University of Oklahoma.;

  • 授予单位 The University of Oklahoma.;
  • 学科 Psychology Industrial.; Psychology Psychometrics.
  • 学位 Ph.D.
  • 年度 2002
  • 页码 105 p.
  • 总页数 105
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 工业心理学;心理学研究方法;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号