首页> 外文学位 >Fluence measurement for polychromatic UV disinfection systems: Bench-scale modeling and application to characterization of UV reactors.
【24h】

Fluence measurement for polychromatic UV disinfection systems: Bench-scale modeling and application to characterization of UV reactors.

机译:多色紫外线消毒系统的注量测量:台式规模化建模及其在紫外线反应器表征中的应用。

获取原文
获取原文并翻译 | 示例

摘要

There has been increased interest in exploring the use of polychromatic ultraviolet (UV) light from medium pressure (MP) and pulsed-UV (P-UV) lamps as a disinfectant for water supplies in recent years. Traditional methods of UV fluence measurement, which were developed for monochromatic light sources, lack fundamental accuracy in estimating the germicidal UV fluence from polychromatic light sources.; In this study, a new approach for effective germicidal UV fluence quantification from polychromatic UV systems, using chemical actinometry, was developed. Based on the knowledge of specific lamp parameters and the water absorbance, a mathematical model combining direct chemical actinometry measurement and mathematical analysis was developed. Incident UV fluence, average UV fluence within the water body and the germicidally effective UV fluence were predicted from the model and compared with a radiometry-based mathematical model and biodosimetry (B. subtilis microbial challenge) to evaluate the accuracy of the model. Experiments were conducted on both the bench-scale collimated beam and the UV reactor scale. Results showed chemical actinometry coupled with mathematical analysis improved the accuracy of effective germicidal fluence measurement when using the biodosimetry results as a benchmark. Uridine and potassium iodide/iodate actinometers were used in the experiments.; A spherical actinometer, consisting of a quartz vessel containing a chemical actinometer, was used to obtain the fluence rate at certain coordinates in the LP and MP reactors in air or water media. This approach was shown to be a convenient tool for experimental determination of the fluence rate distribution in a UV reactor. The reflection and shadowing effects from adjacent lamps were demonstrated and quantified experimentally by using the spherical actinometer.; Quantum yields of KI/KIO3 and uridine actinometers in the 200–300nm range were determined by three different monochromatic light-providing instruments. At pH 9, the quantum yield of the 0.6 M KI/0.1 M KIO3 at 254 nm was 0.71 mole einstein−1. Quantum yield appeared to be constant below wavelength of 254 nm and decreased with increasing wavelength. At light intensity about 1mW cm−2, neutral pH, and low uridine concentration (μM range), the quantum yield of uridine at 254 Mn was 0.015 mole einstein−1. The quantum yield of uridine was determined to be independent of wavelength.
机译:近年来,人们越来越有兴趣探索使用来自中压(MP)的多色紫外线(UV)和脉冲紫外线(P-UV)灯作为供水消毒剂。为单色光源开发的传统UV能量通量测量方法在估计多色光源的杀菌UV能量通量方面缺乏基本准确性。在这项研究中,开发了一种使用化学光度法从多色紫外线系统进行有效杀菌紫外线通量定量的新方法。基于特定的灯参数和吸水率的知识,建立了直接化学光化法测量和数学分析相结合的数学模型。从模型中预测了入射紫外线通量,水体内的平均紫外线通量和杀菌有效紫外线通量,并与基于放射学的数学模型和生物剂量学(枯草芽孢杆菌微生物挑战)进行了比较,以评估模型的准确性。实验是在实验室规模的准直光束和UV反应器规模上进行的。结果表明,以生物剂量学结果为基准,化学光度法和数学分析相结合提高了有效杀菌通量测量的准确性。实验中使用了尿苷和碘化钾/碘酸盐光度计。球形光度计由包含化学光度计的石英容器组成,用于在空气或水介质中的LP和MP反应器中的某些坐标下获得通量率。该方法被证明是用于实验确定UV反应器中注量率分布的便捷工具。使用球形光度计对相邻灯的反射和阴影效果进行了实验验证和量化。用三种不同的单色光提供仪器测定200 / 300nm范围内的KI / KIO 3 和尿苷光度计的量子产率。在pH 9时,在254 nm处0.6 M KI / 0.1 M KIO 3 的量子产率为0.71摩尔爱因斯坦 -1 。在254nm波长以下,量子产率似乎是恒定的,并且随着波长的增加而降低。在约1mW cm -2 的光强度,中性pH和低尿苷浓度(μM范围)下,在254 Mn下尿苷的量子产率为0.015摩尔爱因斯坦 -1 。测定尿苷的量子产率与波长无关。

著录项

  • 作者

    Jin, Shanshan.;

  • 作者单位

    Duke University.;

  • 授予单位 Duke University.;
  • 学科 Engineering Environmental.; Chemistry Radiation.
  • 学位 Ph.D.
  • 年度 2003
  • 页码 166 p.
  • 总页数 166
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 环境污染及其防治;化学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号