首页> 外文学位 >Modeling of transport processes during solution, melt and colloidal crystal growth.
【24h】

Modeling of transport processes during solution, melt and colloidal crystal growth.

机译:在溶液,熔体和胶体晶体生长过程中的运输过程建模。

获取原文
获取原文并翻译 | 示例

摘要

In this thesis, numerical models are developed and applied to study systems used for the growth of crystals from both solution and the melt. Additionally, numerical models are employed to study the convective self-assembly of microspheres within solution.;Solution crystal growth can be visualized in real-time through the application of atomic force microscopy (AFM) within a fluid cell. We apply a three-dimensional finite element method on a parallel supercomputer to determine the continuum transport of momentum and mass in an AFM fluid cell during crystal growth, using data acquired from calcium oxalate monohydrate crystal growth measurements as a comparison. Simulations quantify mass transfer resistances to crystal growth inherent to the fluid cell geometry, and examine influences on growth via high-frequency cantilever oscillations.;The melt growth of single crystal cadmium zinc telluride (CZT), a high-value crystal used in radiation detectors, has posed a serious challenge for crystal growers for over three decades. We employ a two-dimensional finite volume method to simulate CZT growth in a vertical Bridgman furnace used by our collaborators at Pacific Northwest National Laboratories. Models couple the continuum transport of mass, momentum and radiation, and track the interface shape between the melt and crystal. Results provide insight into the thermal behavior of two crucibles to be used for CZT growth by our collaborators.;Three-dimensional computations of steady flows directed toward the (1 1 1) plane of a face-centered cubic (fcc) packing of microspheres are carried out to assess the convective steering hypothesis, which posits that solvent flow could play a role in the assembly of colloidal crystals. The computations clearly show the kinematics of flows into and through the packing and clarify the influences of fluid inertia and particle arrangement. Results from the computations accurately describe the outcome of macroscopic experiments.
机译:在本文中,开发了数值模型并将其应用于研究从溶液和熔体中生长晶体的系统。另外,采用数值模型来研究溶液中微球的对流自组装。可通过在流体池中应用原子力显微镜(AFM)实时显示溶液晶体的生长。我们使用从一水草酸钙晶体生长测量获得的数据作为比较,在并行超级计算机上应用三维有限元方法,以确定晶体生长过程中AFM流体单元中动量和质量的连续传输。仿真可以量化传质对流体单元几何结构固有的晶体生长的阻力,并检查通过高频悬臂振荡对生长的影响。;单晶碲化镉锌(CZT)的熔体生长,一种用于辐射探测器的高价值晶体在过去的三十多年中,它对晶体种植者构成了严峻的挑战。我们采用二维有限体积方法来模拟太平洋西北国家实验室的合作伙伴使用的立式Bridgman炉中CZT的生长。模型耦合了质量,动量和辐射的连续传输,并跟踪熔体和晶体之间的界面形状。结果提供了对我们合作者用于CZT生长的两个坩埚的热行为的洞察力;朝着微球面心立方(fcc)堆积的(1 1 1)平面的稳定流的三维计算是进行了对流转向假说的评估,该假说认为溶剂流动可能在胶体晶体的组装中起作用。这些计算清楚地显示了流入和流过填料的运动学,并阐明了流体惯性和颗粒排列的影响。计算结果准确地描述了宏观实验的结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号