首页> 外文会议>Applied Power Electronics Conference and Exposition (APEC), 2012 Twenty-Seventh Annual IEEE >New multi-channel LEDs driving methods using current transformer in electrolytic capacitor-less AC-DC drivers
【24h】

New multi-channel LEDs driving methods using current transformer in electrolytic capacitor-less AC-DC drivers

机译:在无电解电容器的AC-DC驱动器中使用电流互感器的新型多通道LED驱动方法

获取原文
获取原文并翻译 | 示例

摘要

This paper proposes new multi-channel LEDs driving methods in electrolytic capacitor-less, single-stage AC-DC drivers which use current transformer(CT) to sense output current in constant current control and operate without any damage when the number of LED channels increase or decrease. To increase lifetime of the power supply, electrolytic capacitor is substituted to small polyester film capacitor. And to insure input power factor(PF) higher than 0.9, conventional Buck-Boost PFC converter is chosen due to its simplicity and low cost. The converter operates in boundary mode condition between CCM and DCM to achieve soft switching and high efficiency. In order to verify the performance of new multi-channel LEDs driving method in constant current control, a 35V, 1.3A(45W) Buck-Boost PFC converter was designed and tested to drive 2-channel LED arrays with each 2.2uF polyester film capacitor. Through test and experiment, it was verified that the proposed methods operated very well regardless of the number of LED channels.
机译:本文提出了一种新的无电解单级AC-DC驱动器中的多通道LED驱动方法,该驱动器使用电流互感器(CT)在恒定电流控制中感测输出电流,并且在LED通道数量增加时不会受到任何损坏或减少。为了延长电源的使用寿命,电解电容器被替换为小型聚酯薄膜电容器。为了确保输入功率因数(PF)高于0.9,选择传统的Buck-Boost PFC转换器是因为它的简单性和低成本。转换器在CCM和DCM之间的边界模式下工作,以实现软开关和高效率。为了验证恒流控制中新的多通道LED驱动方法的性能,设计并测试了35V,1.3A(45W)降压-升压PFC转换器,并通过每个2.2uF聚酯薄膜电容器驱动2通道LED阵列。 。通过测试和实验,验证了所提方法无论LED通道数如何都能很好地运行。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号