【24h】

The Microstrain Generation in Cryomilled Nickel by Impurity Nitrogen Atoms

机译:杂质氮原子在冷轧镍中产生微应变

获取原文
获取原文并翻译 | 示例

摘要

The residual microstrains in cryomilled Ni powders, processed under various cryomilling conditions, are measured by XRD and analyzed using a single line approximation (SLA) method. The results show that the average residual microstrains are in the range of 2x10~(-3) ~ 6x10~(-3), and the residual microstrain on the (200) plane is higher than those on the other planes by 33 %. The measured microstrain is proposed to evolve from the introduction of N as impurity atoms in Ni lattice may be attributed to the evolution of the residual microstrain. The N atoms tend to stay in the octahedral sites of Ni, and the diameter of N atom is larger than that of the octahedral site of Ni by 48 %. Accordingly, a lattice strain field is expected around interstitial N atoms that are located at octahedral sites. By comparing the crystal structure around the octahedral site of Ni with that of Ni_3N structure, the lattice strains are estimated to be in the range of 5 ~ 15 %. The results show that the (200) plane has the lattice strains that are two times higher than those in other planes, and this is argued to be the reason for the measured anisotropy of residual microstrain in Ni after cryomilling.
机译:通过XRD测量在各种低温研磨条件下加工的低温研磨镍粉中的残留微应变,并使用单线近似(SLA)方法进行分析。结果表明,平均残余微应变在2x10〜(-3)〜6x10〜(-3)范围内,(200)平面上的残余微应变比其他平面高33%。由于Ni晶格中的杂质原子可能归因于残余微应变的演化,因此建议测量的微应变是从引入N演变而来的。 N原子倾向于留在Ni的八面体位点,并且N原子的直径比Ni的八面体位点的直径大48%。因此,预期位于八面体位置的间隙N原子周围的晶格应变场。通过比较Ni的八面体周围的晶体结构和Ni_3N结构的晶体结构,晶格应变估计在5〜15%的范围内。结果表明,(200)平面的晶格应变是其他平面晶格应变的两倍,这被认为是低温研磨后测得的镍中残余微应变各向异性的原因。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号