首页> 外文会议>Sensors, sampling, and simulation for process control >OPTIMIZATION OF CONTINUOUS HOT DIPPED GALVANIZATION LINES THROUGH THE ADDITION OF A HOT COATING WEIGHT SENSOR
【24h】

OPTIMIZATION OF CONTINUOUS HOT DIPPED GALVANIZATION LINES THROUGH THE ADDITION OF A HOT COATING WEIGHT SENSOR

机译:通过添加热镀膜重量传感器优化连续热浸镀锌线

获取原文
获取原文并翻译 | 示例

摘要

The ability to reliably measure the zinc coating directly above the pot allows for dramatic improvements in hot dipped galvanizing line performance. The feedback time for air knife control is nearly instantaneous. When coupled with intelligent control software in a complete coating weight auto-control system, a "hot" coating weight gauge can reduce overcoating to save raw materials, avoid undercoating and increase overall mill yield. While this location significantly improves coating weight auto-control performance due to short dead length between air knife and measurement, the environment presents electrical, mechanical, and thermal challenges that must be considered in the final sensor design.
机译:可靠地测量锅正上方的锌涂层的能力可以显着改善热浸镀锌线的性能。气刀控制的反馈时间几乎是瞬时的。与完整的涂层重量自动控制系统中的智能控制软件结合使用时,“热”涂层重量计可以减少涂层过多以节省原材料,避免底涂并提高工厂的整体产量。尽管此位置由于气刀与测量之间的短死区长度而大大提高了涂层重量的自动控制性能,但环境带来了电气,机械和热方面的挑战,在最终传感器设计中必须考虑这些挑战。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号