首页> 外文会议>Quantum Sensing and Nanophotonic Devices II >Nanostructure and Morphology Modified Porous Silicon Sensors
【24h】

Nanostructure and Morphology Modified Porous Silicon Sensors

机译:纳米结构和形态修饰的多孔硅传感器

获取原文
获取原文并翻译 | 示例

摘要

The ability to control and transform the morphology and optical properties of porous silicon (PS) interface arrays can have important implications for displays and sensors. .The optoelectronic properties and interaction sensing capabilities of PS can be varied as a function of pore size and pore morphology as dictated by the manipulation of a surface structure which can be controlled with current density, the solution composition of the electrochemical etches used to prepare the pores, and careful post etch surface treatments. These treatments influence the time dependent photoluminescence (PL) emission from PS. The variation of surface structure as it effects the PL from these PS pore arrays is outlined and discussed within the framework of detailed molecular electronic structure calculations which model the excited state structure giving rise to the UV-visible PL emission from PS. Applications varying from displays to sensors to micro-reactors will be considered. Porous silicon interfaces have also been transformed within the framework of nanotechnology to create highly efficient sensors displaying a rapid, reversible, sensitive, and selective response to HCl, NH_3, CO, and NO down to the ppb level. Photoluminescence induced metallization is used to obtain a highly efficient, <20Ω, electrical contact to the sensor, allowing operation at a bias voltage of 1-10mV. The introduction of gold and tin-based nanostructures to a microanoporous PS array selectively modifies its impedance response to considerably improve the detection of the NH_3, CO, and NO. Through FFT analysis, a gas response can be acquired and filtered on a drifting baseline, further improving sensitivity. New nanoscale exclusive techniques have been developed for the rapid formation of highly efficient TiO_(2-x)N_x nanophotocatalysts, operative and tunable throughout the visible wavelength region, to be used in conjunction with porous silicon hybrid nanopore coated micropores to form novel and efficient solar pumped sensor arrays.
机译:控制和转换多孔硅(PS)接口阵列的形态和光学特性的能力可能会对显示器和传感器产生重要影响。 PS的光电特性和相互作用感测能力可以根据孔径和孔形貌的变化而变化,这取决于对表面结构的控制,该结构可以通过电流密度,用于制备纳米管的电化学蚀刻液的溶液成分来控制。毛孔,以及仔细的蚀刻后表面处理。这些处理影响了PS的时间依赖性光致发光(PL)发射。在详细的分子电子结构计算的框架内,概述并讨论了表面结构变化对这些PS孔阵列的PL的影响,该分子结构模拟了激发态结构,从而引起了PS的UV-可见PL发射。将考虑从显示器到传感器再到微反应器的各种应用。多孔硅界面也已在纳米技术的框架内进行了改造,以创建高效的传感器,显示出对ppb级以下的HCl,NH_3,CO和NO的快速,可逆,敏感和选择性的响应。光致发光诱导金属化用于获得与传感器的<20Ω的高效电接触,允许在1-10mV的偏置电压下工作。将金和锡基纳米结构引入微孔/纳米孔PS阵列可选择性地修改其阻抗响应,从而大大改善NH_3,CO和NO的检测。通过FFT分析,可以获取气体响应并在漂移的基线上进行过滤,从而进一步提高了灵敏度。已开发出新的纳米级专有技术,用于快速形成在整个可见光波长范围内可操作且可调谐的高效TiO_(2-x)N_x纳米光催化剂,与多孔硅杂化纳米孔涂覆的微孔结合使用,以形成新颖而高效的太阳能抽运的传感器阵列。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号