首页> 外文会议>IAF Astrodynamics Symposium;International Astronautical Congress >Control of an Over-Actuated Spacecraft using a Combination of a Fluid Actuator and Reaction Wheels
【24h】

Control of an Over-Actuated Spacecraft using a Combination of a Fluid Actuator and Reaction Wheels

机译:使用流体致动器和反应轮的组合控制过致动的航天器

获取原文
获取外文期刊封面目录资料

摘要

In 2017, Technische Universit?t Berlin (TU Berlin) has launched the first space-rated fluid-dynamic actuator (FDA) on the TechnoSat mission. This type of actuator is unique with respect to its dynamic properties, as it offers a very high torque but limited angular momentum storage capabilities in comparison to reaction wheels (RWs). In combination with the tetrahedron RW assembly featured on the spacecraft, a unique combination of attitude control actuators has been formed. The spacecraft axis parallel to the FDA is over-actuated, featuring control actuators of contrasting nature which offers novel options in terms of spacecraft operations. However, with the camera axis on TechnoSat being aligned parallel to the actuators axis of rotation, there is limited operational use to this setup. With Berlin Experimental and Educational Satellite 9 (BEESAT-9), which is to be launched in 2019, TU Berlin currently plans to be the first institution to launch a CubeSat that features a set of three orthogonal RWs and a single picosatellite fluid-dynamic actuator (pFDA) for attitude control. The camera axis of BEESAT-9 is perpendicular to the actuator axis, and therefore allows the demonstration of the proposed novel modes of operation. Among the proposed modes is an artificial increase of the swath and the acquisition of stereo images of multiple, successive targets on the ground. Crucial to these operation scenarios is the control allocation between the RW assembly and the single pFDA. This paper first introduces the spacecraft and describes the proposed novel modes of operation that are enabled by the actuator combination realized on BEESAT-9, followed by a review of the state of the art of control allocation for over-actuated spacecraft. The main part of the paper comprises a description of the implementation of the dynamics models of the attitude control actuators and spacecraft, followed by a description of the implemented high-level control laws and control allocation method
机译:2017年,Technische Universit?T Berlin(Tu Berlin)在Technosat任务上推出了第一个空间额定流体动态执行器(FDA)。这种类型的致动器相对于其动态特性是独特的,因为它提供了与反应轮(RWS)相比的非常高的扭矩但有限的角动量存储能力。结合航天器上的四面体RW组件,形成了姿态控制执行器的独特组合。平行于FDA的航天器轴被过度致动,其中包括对比性的控制执行器,其在航天器操作方面提供了新颖的选择。然而,在Technosat上的相机轴与致动器旋转轴对齐,对该设置有限的操作用途。与柏林实验和教育卫星9(Beesat-9)将于2019年推出,Tu Berlin目前计划成为推出一套三个正交RW和单个Picosatellite流体动力学执行器的CubeSat的第一个机构(PFDA)态度控制。 Beesat-9的相机轴垂直于致动器轴,因此允许所提出的新颖操作模式的示范。在所提出的模式中,人为增加了地面上的SWATH和获取了多个连续目标的立体图像。对这些操作场景至关重要的是RW组件和单个PFDA之间的控制分配。本文首先介绍了航天器,并描述了由在Beesat-9上实现的致动器组合使能的所提出的新颖操作模式,然后审查用于过于致动的航天器的控制分配领域的状态。本文的主要部分包括对姿态控制执行器和航天器的动态模型的实现的描述,然后描述了实现的高级控制定律和控制分配方法的描述

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号