首页> 外文会议>International Conference on Recent Trends in Advanced Materials >Structural, Surface Morphological and Photoiuminescence Properties of Nanostructured Porous Silicon Material for Optoelectronics Application
【24h】

Structural, Surface Morphological and Photoiuminescence Properties of Nanostructured Porous Silicon Material for Optoelectronics Application

机译:纳米结构多孔硅材料用于光电子应用的结构,表面形态学和光铟性能

获取原文

摘要

The promotion of silicon (Si) from being the key material for microelectronics to an interesting material for optoelectronic application is a consequence of the possibility to reduce its device dimensionally by a cheap and easy technique. In fact, electrochemical etching of Si under controlled conditions leads to the formation of nanocrystalline porous silicon (PS) where quantum confinement of photo excited carriers and surface species yield to a band gap opening and an increased radiative transition rate resulting in efficient light emission, In the present study, the nanostructured PS samples were prepared using anodic etching of p-type silicon. The effect of current density on structural and optical properties of PS, has been investigated. XRD studies confirm the presence of silicon nanocrystallites in the PS structure. By increasing the current density, the average estimated values of grain size are found to be decreased. SEM images indicate that the pores are surrounded by a thick columnar network of silicon walls. The observed PL spectra at room temperature for all the current densities confirm the formation of PS structures with nanocrystalline features. PL studies reveal that there is a prominent visible emission peak at 606 nm. The obtained variation of intensity in PL emission may be used for intensity varied light emitting diode applications. These studies confirm that the PS is a versatile material with potential for optoelectronics application.
机译:硅(Si)促进硅(Si)是微电子的关键材料,以实现光电应用的有趣材料,这是通过便宜且易于技术尺寸减少其装置的可能性。事实上,在受控条件下的Si的电化学蚀刻导致形成纳米晶多孔硅(PS)的形成,其中光学激发载流子的量子限制和表面物质产生的带隙开口和增加的辐射过渡率,导致有效的发光导致有效的光发射本研究,使用P型硅的阳极蚀刻制备纳米结构PS样品。研究了电流密度对PS结构和光学性质的影响。 XRD研究证实了PS结构中硅纳米晶体的存在。通过增加电流密度,发现晶粒尺寸的平均估计值降低。 SEM图像表明孔被粗柱网络包围的硅壁。所有电流密度的室温下观察到的PL光谱确认了具有纳米晶特征的PS结构的形成。 PL研究表明,606nm处存在突出的可见光峰。在PL发射中获得的强度的变化可用于强度变化的发光二极管应用。这些研究证实PS是一种多功能材料,具有光电子应用潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号