首页> 外文会议>International Conference on Design, Materials and Manufacture >Effect of graphene oxide nano filler on dynamic behaviour of GFRP composites
【24h】

Effect of graphene oxide nano filler on dynamic behaviour of GFRP composites

机译:石墨烯氧化物纳米填料对GFRP复合材料动态行为的影响

获取原文

摘要

Nano fillers like Alumina oxide, Titanium oxide, Carbon nano tube, Nano clay have been used to improve the mechanical and damping properties of fiber reinforced polymer composites. In the recent years Graphene oxide nano filler is receiving considerable attention for its outstanding properties. Literature available shows that Graphene oxide nano filler can be used to improve the mechanical properties. The use of Graphene oxide in vibration attenuation by enhancing the passive damping in fiber reinforced polymer composite has not been fully explored. The objective of this work is to investigate the dynamic behaviour of Glass fiber-reinforced composite embedded with Graphene oxide nano filler. Graphene oxide is dispersed in epoxy resin with various concentration (0.1%, 0.5% and 1%wt) using ultra-sonification process. Composite laminates were made using the traditional hand-lay-up followed by vacuum bag process. Experimental modal analysis using traditional 'strike method' is used to evaluate modal parameters using FFT analyzer and Data Acquisition System. Experiments were carried out for two different fiber orientations viz 0 → & 45 → and two boundary conditions (Free-Free and Cantilever). The modal parameters such as natural frequency, mode shape, damping ratio were studied. This research work demonstrates the vibration damping behaviour with incorporation of Graphene oxide and provides a basic understanding of the damping characteristics in design and manufacture of high performance composites.
机译:纳米填料如氧化铝,氧化钛,碳纳米管,纳米粘土用于改善纤维增强聚合物复合材料的机械和阻尼性能。在近年来,石墨烯氧化物纳米填料正在接受其优异性能的显着关注。可用的文献表明,石墨烯纳米填料可用于改善机械性能。通过增强纤维增强聚合物复合材料中的被动阻尼的振动衰减在振动衰减中的使用尚未得到充分探索纤维增强聚合物复合材料中的振动氧化物。这项工作的目的是探讨嵌入石墨烯纳米填料的玻璃纤维增​​强复合材料的动态行为。使用超声处理方法,将石墨烯氧化物分散在环氧树脂中,各种浓度(0.1%,0.5%和1%wt)。使用传统的手放置,然后真空袋工艺进行复合层压材料。使用传统的“罢工方法”的实验模态分析用于使用FFT分析仪和数据采集系统评估模态参数。对两种不同的纤维取向进行实验,例如纤维取向→&45→和两个边界条件(无自由和悬臂)。研究了诸如固有频率,模式形状,阻尼比的模态参数。该研究工作表明,具有掺入石墨烯氧化物的振动阻尼行为,并提供了对高性能复合材料的设计和制造中的阻尼特性的基本理解。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号