In this work, tip end-plate is used to improve the noise performance of small axial fans.Both numerical simulations and experimental methods have been adopted to study the fluid flow and noise level of axial fans.Four modified models and the prototype are simulated.Influences of tip end-plate on static characteristics, internal flow field and noise of small axial fans are analyzed.The results show that on basis of the prototype, the model with the tip end-plate of 2 mm width and changed length achieved best noise performance.The overall sound pressure level of the model with the tip end-plate of 2 mm width and changed length is 2.4 dB less than that of the prototype at the monitoring point in specified far field.It is found that the mechanism of noise reduction is due to the decrease of vorticity variation on the surface of blades caused by the tip end-plate.However, compared with the prototype, the static pressure of the model with the tip end-plate of 2 mm width and changed length at design flow rate decreases 2 Pa and the efficiency decreases 0.8％.It is concluded that the method of adding tip end-plate to impeller blades has a positive influence on reducing noise, but it may diminish the static characteristics of small axial fan to some extent.
展开▼
