首页> 外文会议>International Conference and Exhibition on Sustainable Energy and Advanced Materials >Characterization of Compressive and Short Beam Shear Strength of Bamboo Opened Cell Foam Core Sandwich Composites
【24h】

Characterization of Compressive and Short Beam Shear Strength of Bamboo Opened Cell Foam Core Sandwich Composites

机译:竹开电池泡沫芯夹芯复合材料压缩和短梁剪切强度的特征

获取原文

摘要

The paper presents the compressive and the short beam shear strength of a sandwich composite with opened cell foam made of bamboo fiber as the core and plywood as the skins. The core thickness was varied from 10 mm to 40 mm keeping the volume fraction of fiber constant. Several test s were carried out including the core density, flatwise compressive and the short beam shear testing in three point bending. The results show that the density of bamboo opened cell foam is comparable with commercial plastic foam, such as polyurethane foam. The compressive strength tends to increase linearly with increasing the core thickness. The short beam shear failure load of the sandwich composite increases with the increase of core thickness, however on the contrary, the short beam shear strength which tends to sharply decrease from the thickness of 10 mm to 30 mm and then becomes flat.
机译:本文介绍了夹层复合材料的压缩和短梁剪切强度,用竹纤维制成的竹纤维作为核心和胶合板作为皮肤。芯厚度从10mm到40mm变化,保持纤维常数的体积分数。在三点弯曲中进行了几个测试S,包括芯密度,横向压缩和短束剪切测试。结果表明,竹状开放的细胞泡沫密度与商业塑料泡沫等相当,如聚氨酯泡沫。随着芯厚度的增加,抗压强度倾向于线性增加。夹层复合材料的短梁剪切破坏载荷随着芯厚度的增加而增加,但相反,短束剪切强度从10mm至30mm的厚度急剧下降,然后变平。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号