首页> 外文会议>IUPAC International conference on novel materials and their synthesis >ULTRATHIN FILMS OF GRAPHENE OXIDE - EVALUATION OF PHOTOREDUCTION PROCESSES
【24h】

ULTRATHIN FILMS OF GRAPHENE OXIDE - EVALUATION OF PHOTOREDUCTION PROCESSES

机译:石墨烯氧化物超薄薄膜 - 光电过程评价

获取原文

摘要

Approaches to graphene-based electronic materials and devices frequently use graphene oxide (GO), combined with a suitable reduction process to remove the oxygen-containing groups. Photoreduction of GO films can generate suitable structures of reduced graphene oxide (RGO) by means of irradiation masks or laser direct writing techniques. However, the photoreduction mechanisms are not fully resolved yet as the distinction between photothermal and photochemical reaction pathways still needs fundamental clarification. We have prepared ultrathin films of GO by single and multiple spin-coating from aqueous solutions, irradiated them with monochromatic light obtained from a high-pressure mercury arc combined with narrow band filters, and a femtosecond laser system at 800 nm. We used UV-Vis-NIR absorption spectroscopy to characterize the conversion and reaction rate of the photoreduction quantitatively. The reduction yield is evaluated by means of the ratio R = A_(400)/A_(217) where A_(400) and A_(217) refer to the absorbances at 400 nm after irradiation and at 217 nm afore, respectively. The impact of the light intensity I on the reaction yield R indicates the kind of photoreaction. Photothermal reactions show a threshold behavior, i.e., a minimum sample heating is required. Photochemical reactions can occur via single-photon absorption indicated by R ~ I which is independent on the magnitude of I, or via two-photon-absorption which is proven by the R ~ I~2 relationship. We verify pure photochemical photoreduction of GO by single-photon-absorption at wavelengths even up to 546 nm irradiation wavelengths, and two-photon induced photoreduction with high-intensity laser pulses at 800 nm.
机译:基于石墨烯的电子材料和器件的方法经常使用石墨烯(GO),结合合适的还原过程以除去含氧基团。 GO膜的光电可通过照射掩模或激光直接写入技术产生合适的石墨烯氧化物(RGO)结构。然而,光电机制尚未完全解决,因为光热和光化学反应途径之间的区别仍然需要基本的澄清。我们制备了从水溶液中单一和多个旋涂的超薄薄膜,用从高压汞弧线获得的单色光与窄带过滤器一起获得的单色光,以及800nm的飞秒激光系统。我们使用UV-Vis-Nir吸收光谱,以定量地表征光电的转化和反应速率。通过比率R = A_(400)/ A_(217)评估还原产率,其中A_(400)和A_(217)分别在照射后和前面的217nm处参考400nm处的吸光度。光强度I对反应产率R的影响表明了光反应的种类。光热反应显示阈值行为,即,需要最小的样品加热。通过R〜I表示的单光子吸收可以发生光化学反应,其独立于I的幅度,或通过r〜I〜2的关系证明的两光子吸收。我们通过在波长下通过单光子吸收甚至高达546nm照射波长的单光子吸收,以及800nm的高强度激光脉冲的双光子诱导光电引起的纯光化学光学光学光学光学光学光学光学光学光学拍摄。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号