首页> 外文会议>International Conference on Applied Mechanics and Materials >Q3 loess-like silt bearing capacity of foundation partition statistical analysis in the Shanxi Yuncheng
【24h】

Q3 loess-like silt bearing capacity of foundation partition statistical analysis in the Shanxi Yuncheng

机译:Q3黄土淤泥承载能力在山西运城统计分析

获取原文

摘要

Currently it is still a lack of reliable evidences on the evaluation of the bearing capacity of foundation in highway construction of Shanxi Province. Mainly reason is that the method widely used to determine in bearing capacity of loess foundation in building structures is not completely suitable to length and wide range of highway subgrade project. Because Shanxi loess region terrain is very complex, the capacity of Q_3 loess-like silt in Yuncheng of Shanxi is collected and analyzed, based on statistics of a large number of bearing capacity from site loading tect. A linear regression relationship is established between loess foundation bearing capacities and water content, liquid limit, void ratio. Another linear regression relationship is established between saturation and liquid limit void ratio. Meanwhile, it compares these two sets of linear regression relationship with the measured bearing capacity and the carrying capacity by specification. Applied result show that the relative errors of the bearing capacities computed by the formulas are less than 10%, compared with other standard methods to determine the loess bearing capacity. It is significantly improvement for meeting the requirements of the highway construction.
机译:目前仍然缺乏对山西省公路建设的承载能力的可靠证据。主要是原因是,该方法广泛用于确定建筑结构的黄土基础承载能力并不完全适用于长度和广泛的高速公路路基项目。由于山西黄土地区地形非常复杂,因此基于站点加载TECT的大量承载力的统计数据收集和分析山西省山西运济型Q_3黄土淤泥的能力。在黄土基础承载能力和水含量之间建立线性回归关系,液体限制,空隙率。在饱和度和液体限制空隙率之间建立另一种线性回归关系。同时,通过规范将这两组线性回归关系与测量的承载力和承载力进行了比较。应用结果表明,与其他标准方法相比,公式计算的承载能力的相对误差小于10%,以确定黄土轴承容量。满足公路建设的要求有意义。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号