【24h】

Numerical Simulation of Degeneration of Lumbar Spine Segments

机译:腰椎段变性的数值模拟

获取原文

摘要

Numerical analyses are able to simulate processes in their progress that are impossible to measure experimentally, like aging and spinal degeneration processes. 3D FE simulations of aging and sudden degeneration processes of human lumbar spinal segments are presented for compression. The goal of the study was to determine the separated and combined effect of the main mechanical degeneration parameters on the deformation and stress state of the lumbar functional spinal units (FSU) during long- and short-term degeneration processes. Degenerations were modeled by changing the geometry and material properties of segments. Five grades of degeneration were distinguished from healthy to fully damaged cases. Sudden degenerations were modeled by considering the actual grade of aging degeneration state at which it starts to occur. Systematic numerical analyses of degeneration processes were investigated by considering the separated and mutual effects of the main mechanical causing phenomena. During the aging process, first the effect of loss of incom-pressibility of nucleus, later its increasing hardness dominated, yielding the smallest compressive stiffness of the whole disc at mildly degenerated state. In sudden degeneration processes the smallest stiffness belonged also to the mildly degenerated state. Vertical intradiscal stresses showed significant change during aging. Disc deformability and bulging was maximum in mildly degenerated state and decreased during aging. The most important factor in segmental stability is the change of nucleus stiffness. For both long-term aging and sudden traumatic degenerations, the smallest compressive stiffness of disc and the highest risk of segmental instability happen at mildly degenerated state. The disc deformability and bulging is maximal in mildly degenerated state, and increases suddenly in accidental degeneration that may lead to injury in young age again. These effects explain that the segments are most vulnerable in young age; consequently, low back pain problems insult so frequently the young adults.
机译:数值分析能够模拟其进展过程中不可能通过老化和脊柱变性过程进行实验测量的过程。呈现人腰椎段的衰老和突然变性过程的3D用于压缩。该研究的目标是在长期和短期变性过程中确定主要机械变性参数对腰椎功能脊柱单元(FSU)变形和应力状态的分离和综合作用。通过改变段的几何形状和材料性质来建模退化。将五种成果与完全受损的病例的健康区分开来。通过考虑它开始发生的衰老变性状态的实际等级来建模突发的退化。通过考虑主要机械造成现象的分离和相互影响,研究了退化过程的系统数值分析。在老化过程中,首先损失核的损失,后来其增加的硬度占主导地位,在温和地退化状态下产生整个盘的最小压缩刚度。在突然变性过程中,最小的刚度也属于温和退化的状态。垂直体内焦力在老化期间显示出显着的变化。椎间盘可变形性和凸出在轻度退化状态下最大,并且在老化期间减少。节段性稳定性最重要的因素是核刚度的变化。对于长期衰老和突发的创伤性退化,在轻度退化状态下,盘的最小压缩刚度和节段性不稳定性的最高风险发生。光盘可变形性和凸出是轻度退化状态的最大值,并且在意外变性中突然增加,可能导致年轻时的损伤。这些效果解释说,群体在年轻时最脆弱;因此,低腰疼痛问题经常侮辱年轻的成年人。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号