首页> 外文会议>International Conference on Information Processing in Computer-assisted Interventions >Ultrasound-Based Image Guidance for Robot-Assisted Laparoscopic Radical Prostatectomy: Initial in-vivo Results
【24h】

Ultrasound-Based Image Guidance for Robot-Assisted Laparoscopic Radical Prostatectomy: Initial in-vivo Results

机译:基于超声的机器人辅助腹腔镜自由基前列腺切除术的图像指导:初始体内结果

获取原文

摘要

This paper describes the initial clinical evaluation of a realtime ultrasound-based guidance system for robot-assisted laparoscopic radical prostatectomy (RALRP). The surgical procedure was performed on a live anaesthetized canine with a da Vinci SI robot. Intraoperative imaging was performed using a robotic transrectal ultrasound (TRUS) manipulator and a bi-plane TRUS transducer. Two registration methods were implemented and tested: (i)using specialized fiducials placed at the air-tissue boundary, 3D TRUS data were registered to the da Vinci stereo endoscope with an average TRE of 2.37 ± 1.06 mm, (ii)using localizations of the da Vinci manipulator tips in 3D TRUS images, 3D TRUS data were registered to the kinematic frame of the da Vinci manipulators with average TRE of 1.88 ± 0.88 mm using manual tool tip localization, and average TRE of 2.68 ± 0.98 mm using an automatic tool tip localization algorithm. Registration time was consistently less than 2 minutes when performed by two experienced surgeons after limited learning. The location of the TRUS probe was remotely controlled through part of the procedure by a da Vinci tool, with the corresponding ultrasound images being displayed on the surgeon console using TilePro. Automatic tool tracking was achieved with angular accuracy of 1.65 ± 1.24 deg. This work demonstrates, for the first time, the in-vivo use of a robotically controlled TRUS probe calibrated to the da Vinci robot, and will allow the da Vinci tools to be tracked for safety and to be used as pointers for regions of interest to be imaged by ultrasound.
机译:本文介绍了用于机器人辅助腹腔镜自由基前列腺切除术(RALRP)的实时超声波制导系统的初步临床评价。用达芬奇SI机器人在活麻醉犬上进行外科手术。使用机器人跨越超声(TRUS)操纵器和双平面TRUS换能器进行术中成像。实施和测试了两种注册方法:(i)使用放置在空气组织边界的专用基准,3D TRUS数据被登记到DA Vinci立体内窥镜,平均TRE为2.37±1.06mm,(ii)使用本地化3D TRUS图像中的DA Vinci操纵器提示,使用手动工具尖端定位,3D TRUS数据注册到DA VINCI机械手的运动框架,平均TRE为1.88±0.88 mm,使用自动刀尖平均TRE为2.68±0.98 mm本地化算法。在学习后的两个经验的外科医生执行时,注册时间始终不到2分钟。通过DA Vinci工具通过部分过程远程控制TRUS探针的位置,使用TilePro在外科医生控制台上显示相应的超声图像。自动刀具跟踪以1.65±1.24°的角度精度实现。这项工作首次展示了机器人控制的TRUS探针校准到DA Vinci机器人的体内使用,并将允许DA Vinci工具用于安全性,并用作感兴趣区域的指针用超声映像。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号