首页> 外文会议>International Conference on Civil Engineering, Architecture and Sustainable Infrastructure >Research of Punching Performance of Reinforced SFRLAC Superposed Two-way Slabs
【24h】

Research of Punching Performance of Reinforced SFRLAC Superposed Two-way Slabs

机译:加固SFRLAC叠加双向板坯冲压性能研究

获取原文
获取外文期刊封面目录资料

摘要

This paper introduces the test results of eight steel fiber reinforced lightweight aggregate concrete (SFRLAC) superposed two-way slabs under punching load. The tensile and compressive zones of the slabs were cast with the SFRLAC and the ordinary concrete respectively. The slab was simply supported along the four edges under central concentrated load on the short column. The main parameter of SFRLAC was the fraction of steel fiber by volume of 0.8%, 1.2% and 1.6%. The measurements were made such as the deflection, the strains of steel bar and concrete, the crack distribution, the loads corresponding to the yielding of steel bar and the ultimate state. It proved that the punching resistance of SFRLAC superposed two-way slab increased about 51%~78% with the increasing fraction of steel fiber by volume, the ability to resist punching deformation was enhanced remarkably, many fine cracks distributed on the tensile surface, and the ductility at failure state increased to a certain degree.
机译:本文介绍了在冲压负荷下八钢纤维增强轻质聚集体混凝土(SFRLAC)叠置双向板坯的测试结果。用SFRLAC和普通混凝土浇铸板坯的拉伸和压缩区。在短柱上的中央集中负载下的四个边缘简单地支撑了板坯。 SFRLAC的主要参数是钢纤维的比例为0.8%,1.2%和1.6%。进行测量,例如偏转,钢筋和混凝土菌株,裂缝分布,对应于钢筋的屈服和最终状态的载荷。事实化,SFRLAC叠加双向板坯的冲击性随着钢纤维的增加而增加约51%〜78%,耐钢纤维的级数增加,抵抗冲压变形的能力显着,分布在拉伸表面上的许多细裂缝,故障状态下的延展性增加到一定程度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号