首页> 外文会议>International Symposium on Advances in Computational Heat Transfer >DETERMINATION OF INTERFACIAL HEAT TRANSFER COEFFICIENT FOR A MIXED CONVECTION HEAT TRANSFER IN A VERTICAL CHANNEL FILLED WITH UNIFORMLY HEATED BLOCKS
【24h】

DETERMINATION OF INTERFACIAL HEAT TRANSFER COEFFICIENT FOR A MIXED CONVECTION HEAT TRANSFER IN A VERTICAL CHANNEL FILLED WITH UNIFORMLY HEATED BLOCKS

机译:用均匀加热块填充垂直通道中混合对流传热的界面传热系数的确定

获取原文

摘要

The interfacial convective heat transfer coefficient of a periodic porous medium under mixed convection heat transfer is determined computationally by using volume averaging method. The porous medium consists of square blocks in inline arrangement. The continuity, momentum and energy equations are solved in dimensionless form for a representative elementary volume of porous medium and the velocity and temperature fields for different values of Richardson and Reynolds numbers are obtained. Based on the obtained results, the interfacial convective heat transfer coefficient is calculated by using volume average method. The temperature of the solid phase is considered uniform and different than the inlet temperature. A detailed discussion on the effect of the governing dimensionless parameters (i.e. Reynolds, Richardson numbers, and porosity) on the local and average interfacial Nusselt number is done. It is concluded that the local interfacial convective heat transfer coefficient increases with Reynolds number, however the rate of increase depends on Richardson number and porosity. The study is performed for two values of porosity of 0.51 and 0.94.
机译:通过使用体积平均法计算混合对流传热下的周期性多孔介质的界面对流传热系数。多孔介质由绕线排列的方形块组成。以无量纲形式求解连续性,动量和能量方程,用于多孔介质的代表性基本体积,获得了Richardson和Reynolds数的不同值的速度和温度场。基于所得到的结果,通过使用体积平均法计算界面对流传热系数。固相的温度被认为是均匀的,与入口温度不同。关于管理无量纲参数(即Reynolds,Richardson号码和孔隙度)的详细讨论完成了局部和平均界面营养号码。结论是,局部界面对流传热系数随雷诺数增加,但增加率取决于理查森数量和孔隙率。该研究是针对0.51和0.94的两个孔隙率值进行的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号