首页> 外文会议>Vienna International Conference on Mathematical Modelling >Dynamics of martensite phase transitions in shape memory beams under buckling and postbuckling conditions
【24h】

Dynamics of martensite phase transitions in shape memory beams under buckling and postbuckling conditions

机译:屈曲和后置型条件下形状记忆梁的马氏体相变动力学

获取原文
获取外文期刊封面目录资料

摘要

The numerical simulation of phase transitions in shape memory alloy beams under combined mechanical loads and temperature fields is performed on the background of the once coupled Movchan's theory of thermoelastic phase transforms and the finite element approach. The completely incremental formulation of the model of thermoelastic behavior of shape memory alloys is constructed and implemented into the finite element code. The geometrically and physically nonlinear solid finite element model is used to investigate the dynamics of the phase transitions in prismatic beams being axially compressed and cooled through the temperature range of direct martensite transforms. The trivial equilibrium state of a beam is perturbed by applying small initial deflections to study the beam buckling and postbuckling behavior in terms of Lyapunov's concept. It is shown that the clamped-clamped shape memory alloy beam buckles after the initiation of the direct martensite transition at compression forces about 11-14% of the critical forces obtained analytically and numerically and corresponding to the minimum elasticity modulus of the entirely martensite phase constitution. The presented numerical results are consistent with the physical test data and very close to the analytical estimations based on the assumption of the "supplementary phase transform occurring everywhere" advanced by A. Movchan and L. Silchenko. The distribution of the martensite volume ratio over the beam cross-section remains almost linear due to the beam deflection as well at a bifurcation point as in the postbuckling state. This heterogeneity acts as a supplementary perturbation which results in the buckling at very low compression forces. Thus, the assumption of the decisive effect of phase transitions due to the combined compression and cooling on the beam instability is vindicated by the numerical simulation, and the concept of the "supplementary phase transition occurring everywhere" being an extension of Shenley's buckling concept is validated for the practice.
机译:在组合机械载荷和温度场下的形状记忆合金梁中相变的数值模拟在一次耦合的Movchan的热弹性相变性变换和有限元方法的背景下进行。形状记忆合金的热弹性行为模型的完全增量的制剂被构造和实施到有限元码中。几何和物理非线性固体有限元模型用于研究棱镜梁中相变的动态,轴向压缩和通过直接马氏体变换的温度范围冷却。通过应用小初始偏转来扰乱光束的琐碎平衡状态,以研究Lyapunov的概念的横梁屈曲和出现的后行行为。结果表明,夹紧夹紧的形状记忆合金梁在压缩时直接马氏体转变后的夹持形状横划线串联的约11-14%的临界力分析和数值和对应于完全马氏体相位构成的最小弹性模量。呈现的数值结果与物理测试数据一致,并且非常接近基于A. Movchan和L. Silchenko先进的“各处的辅助相变的分析估计”。由于梁偏转,在光束横截面上的横截面上的马氏体体积比的分布几乎是线性的,因为梁偏转也是如错过的射击点。这种异质性充当补充扰动,这导致在非常低的压缩力下屈曲。因此,通过数值模拟来证明由于梁不稳定性的组合压缩和冷却引起的相变的决定性效果的假设,并且验证了雪莉屈曲概念的延伸的“各处的辅助相转变发生的概念”为了做法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号