首页> 外文会议>International Conference on Materials and Products Manufacturing Technology >Flow field simulation and Atomization characteristic of Pneumatic oil mist swirler
【24h】

Flow field simulation and Atomization characteristic of Pneumatic oil mist swirler

机译:气动油雾旋流器的流场仿真与雾化特性

获取原文

摘要

Based on the theory of Fluid Dynamics CFD and Fluid analysis software Fluent, we accomplished the flow field simulation of internal speed and internal pressure of pneumatic oil mist atomizer. Both the flow field simulation and the results of experiment are in good agreement particle size and density of oil mist change very little when the pressure of compressed air is kept constant while the distance of nozzle and baffle is varied. When the distance from nozzle to baffle is fixed, and the pressure of compressed air is increased gradually, the density of oil mist will increase and the particle size of oil mist will decrease along with the increasing pressure of compressed air. This decreasing trend of particle size of oil mist will slow down when the pressure of compressed air increases to 0.35Mpa. The particle size of oil mist can reach 2 μm.
机译:基于流体动力学CFD和流体分析软件流畅的理论,我们完成了气动油雾雾化器内速和内部压力的流场模拟。当压缩空气的压力保持恒定时,流场仿真和实验的实验结果均具有良好的一致性粒度和油雾密度变化很小,而喷嘴和挡板的距离变化。当从喷嘴到挡板的距离是固定的,并且压缩空气的压力逐渐增加,油雾的密度将增加并且油雾的粒度随着压缩空气的增加而降低。当压缩空气的压力增加到0.35MPa时,油雾的粒度的降低趋势将减慢。油雾的粒度可以达到2μm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号