Study on the joining characteristics of diffusion welding lap joint with various temperatures between aluminum alloy and stainless steel

摘要

The diffusion welding between aluminum alloy and steel was achieved in this study. The influence of welding temperature on the interfacial microstructure and tensile shear strength of the joint were investigated. The joint with 101.3 MPa was obtained under the condition of the welding temperature of 525°C. The results reveal that the reaction layer thickness increases with the increasing of welding temperatures and that the reaction layer consists of Al_5Fe_2 and Al_(13)Fe_4 formed in the interface. The strength of the joint is related to the reaction layer thickness and when the reaction layer thickness was approximately 0.8 μm, the value of the joint strength reached maximum.