Effect of TaC on W-Ti-Co Ultrafine Cemented Carbides

摘要

The W-Ti-Co powders was doped different content of TaC with an average particle size of 270nm were prepared by 72 hours high-energy ball milling. The powder was cold isostatic pressed and vacuum sintered at 1380°C. The physical properties and the micrographs of samples were detected. The main conclusions were as follow: the density and Cobalt magnetic decreased with the content of TaC increasing, the coercivity increased at first and then decreased, the coercivity of alloy with 0.6wt.% TaC was higher than the other. When the content of TaC was less than 0.6wt.%, the hardness increased with the content of TaC increasing. While when the content of TaC was more than 0.6wt.%, the hardness decreased obviously. Comparing with the alloy without TaC doped, the transverse rupture strength (TRS) of the alloy with 0.4wt.%TaC increased to a larger extent. When the content of TaC was more than 0.4wt.%, the transverse rupture strength (TRS) decreased with the content of TaC increasing. The TaC could inhibit the grain growth, and the comprehensive performance of the alloy with 0.4wt.% TaC was best.