Surfactant Treatment has Amazingly Improved Squeeze Cementing Result

摘要

Usually squeeze cementing job was done in more than once; failure usually happens and need to be re- squeezed once or more. One time squeeze cementing is very rarely occurs. Hypothetical theory is caused by leaking, space appears between matrix rock and cement during drying process. This phenomenon happens due to the fluid base differentiation between both fluids in cementation process which causing dis-joint cement fluid (water base) with oil film that coats the rock matrix wall (oil wet). Surfactant treatment method is used to reduce squeeze cementing frequency where main function of surfactant is to change fluid surface tension between oil and water so both fluids will blend homogeneously. Cement slurry as water base fluid are expected to perfectly coat in rock matrix that have changed to be water wet from originally oil wet. By injecting amount of surfactant into rock formation and soaking couple hours before squeeze cementing job execute, expected could change formation rock wettability from oil wet into water wet so coated and trapped oil between matrix rock will release and pushed by water or cement slurry when it pumped or squeezed. Perfectly adhere between rock matrix and cement will happen to disappear the space and finally increase the quality of Squeeze Cementing Job.