首页> 外文会议>Joint European Magnetic Symposia >Thermal stability of L1_1 ordered phase in CoPt-alloy thin films formed on MgO(111) single-crystal substrates
【24h】

Thermal stability of L1_1 ordered phase in CoPt-alloy thin films formed on MgO(111) single-crystal substrates

机译:在MgO(111)单晶基板上形成的Copt-Alloy薄膜中L1_1有序相的热稳定性

获取原文

摘要

Metastable L1_1 ordered CoPt(111) epitaxial thin films with the order degrees around 0.3 are formed on MgO(111) single-crystal substrates at 300 °C by using an ultra-high vacuum radio-frequency magnetron sputtering system. The effects of annealing after film formation on the structure and the magnetic properties are investigated. As the annealing temperature increases, the order degree gradually decreases. At 600 °C, the ordered phase disappears and the film changes to disordered structure. CoPt(lll) epitaxial films with disordered structure are also prepared at room temperature and 600 °C and then these films are annealed at300 °C. However, ordered phase formation is not recognized in the films. The metastable L1_1 ordered phase is preferentially formed when the film is deposited at a temperature of 300 °C. Annealing a film with disordered structure at 300 °C does not promote L1_1 ordering. The CoPt films involving L1_1 ordered structure show perpendicular magnetic anisotropies, whereas the disordered films have in-plane anisotropies. The magnetic properties are influenced by the order degree.
机译:亚稳L1_1有序的CoPt通过使用超高真空射频磁控溅射系统形成(111)外延薄膜与约0.3的顺序度的对MgO(111)单晶衬底在300℃下。退火后的结构和磁特性的成膜的影响进行了研究。随着退火温度的增加,有序度逐渐减小。在600℃下,有序相消失,膜变为无序结构。的CoPt(III)的外延膜与无序结构也在室温和600℃制备的,然后将这些膜进行退火AT300℃。然而,有序相的形成不是在电影的认可。亚稳L1_1有序当膜是在300℃的温度下沉积的优先形成相。退火的膜,在300℃下无序结构不促进L1_1排序。涉及L1_1所述的CoPt膜有序结构显示垂直磁各向异性,而无序膜具有同平面各向异性。磁特性是通过有序度的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号