Study of erosion behaviour of conventional and nanostructured WC-12Co coatings sprayed by atmospheric plasma

摘要

Thermal sprayed WC-Co coatings are used extensively to enhance the wear resistance of a wide range of engineering components. In this paper, erosive resistance of plasma atmospheric sprayed WC-12Co coatings has been evaluated. Solid particle erosion tests were conducted on these coatings at different angles of impact with silica and alumina abrasives of size 250 μm. Coatings have been deposited by using micrometric and nanometric agglomerated powders, employing H_2 and He as plasmogen gas. In order to determine the erosion regime (ductile or brittle), the influence of impact angle on the erosion rate has been studied. Optical microscope and FESEM have been used to analyze the eroded surface. The influence of the plasmogen gas and the powder employed on the erosive behaviour of the coating has been evaluated. An attempt to connect the erosive behaviour with mechanical properties and microstructure has been made. Hardness has been determined by means of several measurements of Vickers microhardness; fracture toughness has been estimated through indentation method. Identification of phases has been made by means of X Ray diffraction.