DETAILED DESIGN, MANUFACTURING AND TESTING OF A STRIPLINE EXTRACTION KICKER FOR CTF3 COMBINER RING

摘要

The first calculations to design the CTF3 Combiner Ring extraction kicker are reported elsewhere. The last computing step before fabrication is the wakefield analysis, to determine if the bunch disturbance is acceptable. Two different codes have been used for crosschecking: CST Particle Studio and GDFidl. The computation is challenging because of the long structure (2.4 m) with a short bunch (3 mm). Besides, both transitions are not equal, as a result of different straight sections of the input and output beam pipe, and then the solution method is more complex. On the other hand, the main challenges for manufacturing are the long electrodes support by ceramic stand-offs and the flexible electrical connections to allow for electrodes thermal differential displacement. Special tooling has also been developed for assembly within the required tolerances. The device has been successfully leak tested. High frequency transmission coefficients and dielectric strength were also measured.