首页> 外文会议>International Conference on Manufacturing Science and Engineering >Microstructure formation at low velocity during directional solidification of Pb-Bi peritectic alloys
【24h】

Microstructure formation at low velocity during directional solidification of Pb-Bi peritectic alloys

机译:PB-BI晶体合金定向凝固期间的微观结构形成

获取原文

摘要

Directional solidification experiments on Pb-Bi peritectic alloys have been conducted at very low velocity (FMX5 μm/s) and high thermal gradient (G=25 K/mm). Incomplete banded and oscillatory structures have been observed in both of hypoperitectic and hyperperitectic compositions over several millimeters of growth. These structures resulted from the repeated nucleation and competition between properitectic α- and peritectic β-phases. The banded or oscillatory structures are found to be transient and the final steady-state phase was only the peritectic β-phases. With an increase in composition, β phase formed and a phase disappeared at a lower solidified distance. Composition variations in the banded structure are measured to determine the solute distribution along the growth direction.
机译:PB-BI晶体合金的定向凝固实验已经在非常低的速度(FMX5μm/ s)和高热梯度(g = 25k / mm)下进行。在多毫米的生长中,在低钾结构和超结构化组合物中观察到不完全带状的结构和振荡结构。这些结构是由重复的核心和胚层和包β-阶段之间的反复成核和竞争产生。发现带状或振荡结构是瞬时的,最终稳态阶段仅是晶β相。随着组合物的增加,形成的β相和相位在较低的凝固距离下消失。测量带状结构的组成变型以确定沿生长方向的溶质分布。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号