首页> 外文会议>AIAA Modeling and Simulation Technologies Conference >Piloted Simulator Evaluation of New Fault-Tolerant Flight Control Algorithms for Reconstructed Accident Scenarios
【24h】

Piloted Simulator Evaluation of New Fault-Tolerant Flight Control Algorithms for Reconstructed Accident Scenarios

机译:用于重建事故情景的新容错飞行控制算法的导频模拟器评估

获取原文

摘要

A research initiative within the framework of the Group for Aeronautical Research and Technology in Europe (GARTEUR) co-operation program examined the application of multiple fault-tolerant flight control (FTFC) algorithms in a realistic aircraft accident scenario. An aircraft model, reconstructed using the Digital Flight Data Recorder (DFDR) of the 1992 Amsterdam Bijlmermeer aircraft accident (Flight 1862), was used to evaluate the algorithms in an offline benchmark and an online piloted evaluation. This paper focuses on the experiment development for a piloted simulator evaluation of innovative reconfigurable control algorithms applied to a damaged civil transport aircraft. The evaluation scenario, measurements and experimental design, as well as the real-time implementation are described. The evaluation showed that the FTFC algorithms were able to restore conventional control strategies after the aircraft configuration has changed dramatically due to severe failures. The algorithms supported the pilot after a failure by lowering workload and allowing a safe return to the airport. For some failures, the handling qualities were shown to degrade less with a failure than the baseline classical control system.
机译:欧洲航空研究和技术集团框架内的研究举措(Garteur)合作计划检测了多次容错飞行控制(FTFC)算法在逼真的飞机事故情景中的应用。使用1992年Amsterdam Bijlmermer飞机事故(航班1862年)的数字飞行数据记录仪(DFDR)重建的飞机模型用于评估离线基准和在线试验评估中的算法。本文重点介绍了对损坏的民用运输机的创新可重构控制算法的试点模拟器评估的实验开发。描述了评估方案,测量和实验设计以及实验设计。评估表明,由于严重的故障,飞机配置在飞机配置发生显着变化后,FTFC算法能够恢复传统的控制策略。通过降低工作量并允许安全返回到机场,算法在失败后支持导频。对于某些故障,将处理质量显示出比基线古典控制系统的故障降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号