首页> 外文会议>SPIE Conference on Nanophotonic materials >Strong Photoluminescence at 1540 nm from Er-doped AmorphousSilicon Oxycarbide: A Novel Silicon Material for Photonic Applications
【24h】

Strong Photoluminescence at 1540 nm from Er-doped AmorphousSilicon Oxycarbide: A Novel Silicon Material for Photonic Applications

机译:来自Er-掺杂的氨基吡啶硅氧化物的1540nm的强光致发光:一种用于光子应用的新型硅材料

获取原文

摘要

The present investigators have previously reported on strong room-temperature luminescence at 1540 nm from erbium-doped amorphous silicon oxycarbide (a-SiC_xO_y:Er) thin films. An enhancement of –20 times was found for as-grown SiC_(0.5)O_(1.0):Er compared to Si0_2:Er control samples under continuous wavelength (cw) pumping at 496.5 nm. Here, we report the effects of post-deposition annealing on the photoluminescence (PL) properties of Er-doped silicon oxycarbide. The amorphous SiC_xO_y films were grown by thermal chemical vapor deposition (TCVD) at 800°C and post-deposition annealing was conducted in the temperature range 500-1100°C. The thin films were then implanted with 260keV Er ions and subsequently annealed at 900°C. Strong room-temperature photoluminescence around 1540 nm was observed, with efficient Er~(+3) ion excitation occurring for pumping wavelengths ranging from 460 nm to 600 nm. Modeling of the power dependence of Er luminescence yielded an effective Er excitation cross-section about four orders of magnitude larger than that for a direct optical excitation of Er~(+3) ions. Additionally, Fourier transform infrared spectroscopy (FTIR) studies of post-deposition annealed samples revealed a strong correlation between the Er PL intensity and the C-O bond concentration in the materials. The work suggests a novel method for achieving efficient Er luminescence in Si-based materials through controlled engineering of the Si-C-O system.
机译:薄膜:本研究人员已经在从掺铒非晶碳氧化硅(二一-SiC_xO_y)1540nm处的强的室温发光以前的报告。的-20倍的增强被发现的作为生长SiC_(0.5)O_(1.0):二相比Si0_2:在连续波长(CW)在496.5纳米泵浦铒对照样品。在这里,我们的光致发光(PL)掺铒碳氧化硅的性能报告沉积后退火的效果。无定形SiC_xO_y膜通过热化学气相沉积(TCVD)在800℃和沉积后退火生长是在温度范围500-1100进行℃。薄膜然后用260keV Er离子注入并随后在900℃下退火。围绕1540纳米强室温光致发光,观察到,具有高效尔〜发生泵送波长范围从460至600nm(3)离子激发。尔发光的功率依赖性的建模产生约幅度比较大的四个数量的有效尔激发横截面为二〜(3)离子的直接光激发。另外,傅立叶变换后沉积的红外光谱(FTIR)的研究退火的样品揭示了铒PL强度和在材料中的C-O键的浓度之间存在强相关。该研究表明,通过在Si-C-O系统的控制工程实现-Si系材料高效尔发光的新方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号