Since the late 1980’s when Maersk published their work on multiple fracturing of horizontal wells in the Dan Field,the use of transverse multiple fractured horizontal wells has become the completion of choice and become the“industry standard”for unconventional and tight oil and tight gas reservoirs.Today approximately sixty percent of all wells drilled in the United States are drilled horizontally and nearly all of them are multiple fractured.Because a horizontal well adds additional cost and complexity to the drilling,completion,and stimulation of the well we need to fully understand anything that affects the cost and complexity.In other words,we need to understand the affects of the principal stresses,both direction and magnitude,on the drilling completion,and stimulation of these wells.However,little work has been done to address and understand the relationship between the principal stresses and the lateral direction. This paper has as its goal to fundamentally address the question,in what direction should I drill my lateral?Do I drill it in the direction of the maximum horizontal stress(longitudinal)or do I drill it in the direction of the minimum horizontal stress(transverse)?The answer to this question relates directly back to the title of this paper and please Don’t let your land man drive that decision. This paper focuses on the horizontal well’s lateral direction(longitudinal or transverse fracture orientation)and how that direction influences productivity,reserves,and economics of horizontal wells. Optimization studies using a single phase fully three dimensional numeric simulator including convergent non-Darcy flow were used to highlight the importance of lateral direction as a function of reservoir permeability.These studies,conducted for both oil and gas,are used to identify the point on the permeability continuum where longitudinal wells outperform transverse wells.The simulations compare and contrast the transverse multiple fractured horizontal well to longitudinal wells based on the number of fractures and stages.Further,the effects of lateral length,fracture half-length,and fracture conductivity were investigated to see how these parameters affected the decision over lateral direction in both oil and gas reservoirs.Additionally,how does completion style affect the lateral direction?That is,how does an open hole completion compare to a cased hole completion and should the type of completion affect the decision on in what direction the lateral should be drilled?
展开▼
