首页> 外文会议>China International Conference on High-Performance Ceramics >Ultrafine WC-Ni-SiCw Cemented Carbides Fabricated by Spark Plasma Sintering
【24h】

Ultrafine WC-Ni-SiCw Cemented Carbides Fabricated by Spark Plasma Sintering

机译:超细WC-Ni-SiCW胶合碳化物由火花等离子烧结制造

获取原文

摘要

Ultrafine WC-Ni cemented carbides with addition of SiC whisker (SiCw) were fabricated by spark plasma sintering. The microstructure and mechanical properties of the fabricated cemented carbides were investigated. It was found that the addition of SiC whisker had no obvious influence on the phase compositions of the cemented carbides, but the mean grain size of the cemented carbides decreased as the addition fraction of SiC whisker increased. The fabricated WC-Ni cemented carbides presented the highest hardness when 0.75 wt% SiC whisker was added. However, the addition of SiC whisker was detrimental to the flexural strength of the cemented carbides because of the formation of inhomogeneous microstructure in the WC-Ni cemented carbides.
机译:通过喷射等离子体烧结制造了加入SiC晶须(SiCW)的超细Wc-Ni硬质合金。研究了制造的碳化物碳化物的微观结构和机械性能。发现添加SiC晶须对碳化物碳化物的相组合物没有明显影响,但粘合碳化物的平均晶粒尺寸随着SiC晶须增加的添加分数而降低。当加入0.75wt%的SiC晶须时,制造的WC-Ni硬质碳化物呈现了最高的硬度。然而,由于WC-Ni硬质合金中的不均匀微观结构形成,添加SiC晶须对粘合碳化物的弯曲强度有害。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号