首页> 外文会议>CICC-7;China international conference on high-performance ceramics >Ultrafine WC-Ni-SiCw Cemented Carbides Fabricated by Spark Plasma Sintering
【24h】

Ultrafine WC-Ni-SiCw Cemented Carbides Fabricated by Spark Plasma Sintering

机译:火花等离子体烧结制备超细WC-Ni-SiCw硬质合金

获取原文

摘要

Ultrafine WC-Ni cemented carbides with addition of SiC whisker (SiCw) were fabricated by spark plasma sintering. The microstructure and mechanical properties of the fabricated cemented carbides were investigated. It was found that the addition of SiC whisker had no obvious influence on the phase compositions of the cemented carbides, but the mean grain size of the cemented carbides decreased as the addition fraction of SiC whisker increased. The fabricated WC-Ni cemented carbides presented the highest hardness when 0.75 wt% SiC whisker was added. However, the addition of SiC whisker was detrimental to the flexural strength of the cemented carbides because of the formation of inhomogeneous microstructure in the WC-Ni cemented carbides.
机译:通过火花等离子烧结制备了添加了SiC晶须(SiCw)的超细WC-Ni硬质合金。研究了所制造的硬质合金的显微组织和力学性能。发现SiC晶须的添加对硬质合金的相组成没有明显的影响,但是随着SiC晶须的添加比例的增加,硬质合金的平均晶粒尺寸减小。当添加0.75 wt%SiC晶须时,制成的WC-Ni硬质合金具有最高的硬度。但是,由于在WC-Ni硬质合金中形成了不均匀的微观结构,因此添加SiC晶须不利于硬质合金的抗弯强度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号