Design of a new BaF{sub}2 PET module concept and preliminary evaluation results

摘要

We describe a new positron emission tomography (PET) detection module using BaF{sub}2 crystals. We use the separation between the fast (0.6 ns, 220 nm) and the slow (630 ns, 310 nm) scintillation component of the barium fluoride through an UV glass filter to code the interaction localization. The timing is done on the fast component and the spectroscopy on the slow component. The photoelectronic yield of BaF{sub}2 crystals (10×10×30, 8×8×30 and 6×6×30 mm{sup}3) coupled to 1 diameter photomultiplier tubes (PMTs) has been measured to quantify the light losses due to this geometry. As reference we present simulations and measurements of the efficiency of this crystals for detection of 511 keV gammas in coincidence, and a measurement of the time resolution of the system.