The effect of Ti amounts on the mechanical properties of the high-strength Ti-Nb-IF cold-folled batch annealed steels

机译：Ti对高强度Ti-NB的机械性能的影响 - 如果冷毛批量退火钢

获取原文

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

The effects of Ti(Nb is almost constant) in P and Mn-added Nb+Ti-IF steels on the properties of cold-roleld batch annealed sheet steel has bene studied. It shows that value is the highest when Ti/N=1 (atomic ratio). The highs trength Nb+Ti-IF steels strengthened by P- and Mn-added exist a little strain aging, since some Ti wwas exhausted by P to form PTiFe, C and N atom would be interstitial again.

机译：P和Mn加入的Nb + Ti的Ti（Nb几乎是恒定）的效果对冷罗德批量退火板钢的性能进行了Bene。它表明，当Ti / n = 1（原子比）时，值是最高的。通过P-和MN添加强化的高分高度Nb + Ti-如果存在一点菌株衰老，因为P耗尽的一些Ti wwas形成Ptiafe，C和N原子将再次是间质的。

著录项

来源
《International conference on advanced automobile materials》|1997年||共4页
会议地点
作者
Wang Li; Yuan Ming Sheng; Liu Jian Min;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类汽车材料;
关键词
high strength; Nb+Ti-IF; batch annealing; PTiFe; recrystallization;

机译：高强度;Nb + Ti-If;批量退火;Ptiafe;再结晶;

相似文献

外文文献
中文文献
专利

1. Effect of Heating Rate during Continuous Annealing on Microstructure and Mechanical Properties of High-Strength Dual-Phase Steel [J] . Deng Y. G., Li Y., Di Hongshuang, Journal of Materials Engineering and Performance . 2019,第8期

机译：连续退火过程中加热速率对高强度双相钢的微观结构和力学性能的影响
2. Effect of Annealing Temperature on Microstructures and Mechanical Properties of 1000MPa Grade Cold Rolling High-strength Steel on Ultra-fast Cooling Condition [J] . Jingfan Hu, Renbo Song, Sanchuan Yu, Materials science forum . 2015,第期

机译：退火温度对超快冷条件下1000MPa级冷轧高强度钢组织和力学性能的影响
3. Influence of annealing on the microstructure, interfacial compounds and mechanical properties of hot rolling bonded Ti/steel clad plate with bimetallic interlayered steel and vanadium [J] . Li Boxin, He Weijun, Chen Zejun, Materials Science and Engineering . 2019,第SEPa9期

机译：退火对双金属夹层钒钢热轧Ti /钢复合板的组织，界面化合物和力学性能的影响
4. The effect of Ti amounts on the mechanical properties of the high-strength Ti-Nb-IF cold-folled batch annealed steels [C] . Wang Li, Yuan Ming Sheng, Liu Jian Min International conference on advanced automobile materials;ICAM'97 . 1997

机译：Ti含量对高强度Ti-Nb-IF冷轧分批退火钢力学性能的影响
5. Fabrication, morphologie et proprietes mecaniques des mousses metalliques a base de titane et d'alliages de titane metastables pour des applications biomedicales =FABRICATION, MORPHOLOGY AND MECHANICAL PROPERTIES OF TI AND METASTABLE TI BASED FOAMS FOR BI [D] . Rivard, Jonathan. 2014

机译：用于生物医学的基于钛和亚稳钛合金的金属泡沫的制造，形态和力学性能= TI和亚稳TI BI泡沫的制备，形态和力学性能
6. Damage Mechanisms and Mechanical Properties of High-Strength Multiphase Steels [O] . Sebastian Heibel, Thomas Dettinger, Winfried Nester, 2018

机译：高强度多相钢的损伤机理与力学性能
7. Effects of Ti on Microstructure, Mechanical Properties and Corrosion Behavior of High-Strength Steel Weld Metals for Offshore Structures [O] . Jianguo Chen 2021

机译：Ti对海上结构高强度钢焊金属的微观结构，力学性能和腐蚀行为的影响

The effect of Ti amounts on the mechanical properties of the high-strength Ti-Nb-IF cold-folled batch annealed steels

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅